You can quickly compare and choose from the 10 best official raspberry pi poe products from this post. Here, we find you the top 10 of official raspberry pi poe products through testing and analyzing tons of products. Please check the following list and buy the official raspberry pi poe products that suit your need most.

The below is the 10 Best official raspberry pi poe products for Every Budget.

(2021 New Version) Official Raspberry Pi POE+ HAT for Raspberry Pi 4/3B+, Supports 802.3at PoE Standard with 5V DC/4A High Power Output,with Controllable Brushless Cooling Fan

 

  • The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B.
  • Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time.
  • Built-in controllable brushless 25 x 25mm fan delivering 2.2 CFM for better heat dissipation
  • Fully isolated switched-mode power supply for better power efficiency
  • Providing both network connection and power supply for your Raspberry Pi in one cable

Official Raspberry Pi Power Over Ethernet (PoE) HAT for Raspberry Pi 3 B+ and 802.3af PoE Network

 

  • This is the 2018 official Raspberry Pi Power Over Ethernet (PoE) HAT for the Raspberry Pi 3 Model B+. This is the updated version, which addresses the current limiting issue found in the original release.
  • May be used to power your Raspberry Pi 3 B+ with an Ethernet cable on a PoE enabled network, eliminating the need for a separate power supply.
  • 802.3af compliant PoE.
  • Class 2 PoE device: 36-57v input, 5v/2.5a output.
  • SMPS: Fully isolated Switched-Mode Power Supply with fan for cooling.

C4Labs Zebra PoE + Case Kit for Raspberry Pi 4B or 3B+ and PoE+ HAT or Official PoE Hat – Black Ice

 

  • Case Kit Compatible with Raspberry Pi 4B, 3B+, 3B, 2B, B+ (not included) and Official Raspberry Pi PoE Hat (not included) or PoE+ Hat (not included).
  • Clear Acrylic and three accent colors to choose from: Black, Blue or Wood
  • Stainless steel Hardware
  • Rubber Feet Included
  • Designed and Crafted in Tacoma, WA USA

This Review Is Your Primary Source Of High-Quality official raspberry pi poe Products

When it comes to the quality of products we use every day, most of us want the best. We want something that will last and serve its purpose. But what does “the best” mean to different people? For some, it might mean a product that is made with natural ingredients.

Others might prefer something that is eco-friendly or has a low environmental impact. And still, others may prioritize affordability or convenience over all else. With so many choices out there, it can be hard to know which product is really the best for you. But that’s where ratings and reviews come in handy – they can help you narrow down your options and figure out what is most important to you. So before you buy anything, be sure to check out the ratings.

UCTRONICS PoE+ HAT for Raspberry Pi 4B, 802.3at Power Over Ethernet Expansion Board for Raspberry Pi 4 B 3 B+, with Cooling Fan

 

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included).
  • Output Power: DC 5V (3A Max) / 12V (2A Max) via the terminal interface reserved; Total Power Budget: 25W; IEEE 802.3at Compliant
  • Over-temperature Protection: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high.
  • NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector.

There’s a lot of talks these days about the function of official raspberry pi poe products

What is their primary purpose? How are they supposed to make our lives easier? And so on. In the midst of all this deliberation, it’s easy to forget what matters most: that a official raspberry pi poe product should be enjoyable to use. After all, if it’s not fun, why would we want to bother with it? A good product should do two things: meet our needs and make us happy.

 

UCTRONICS PoE hat for Raspberry pi

 

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included).
  • Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high.
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable.

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

 

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters.
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market.
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately.
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the newer HAT specifically for Raspberry Pi 4.

PoE Texas Power Over Ethernet (PoE) HAT for Raspberry Pi 3 B+ 4 and 802.3af PoE Network

 

  • IEEE 802.3af PoE Solution – Works with Any PoE or PoE+ Switch Upto 12 Watts
  • Fits Raspberry Pi 3 B+ and Raspberry Pi 4 (Not Included)
  • Smaller, more space efficient than Official Pi-HAT – Fits inside Official Raspberry Pi Enclosure (Not included)
  • Provides a regulated 5 volts 2.4 amp with solder pads on top for a DC bus
  • For expert technical support from Austin, Texas please call 512 479 0317

Decide which products are best for your needs

With so many options out there, it can be hard to find the perfect official raspberry pi poe product for your needs. That’s why we’ve put together a quick guide to help you choose which one is right for you.

Your time is valuable and you want to make sure that the official raspberry pi poe product you buy is worth your money. You may not have a lot of experience with products, so it can be challenging to know what to look for when choosing one.

First, ask yourself what type of official raspberry pi poe products you’re looking for? Do you want a specific brand? How often do you need to buy these items? And finally, take into consideration how much time and money are available in your budget.

When making a decision about which official raspberry pi poe product to buy, it is important to consider the features that are most relevant to your needs.

These are all great questions to ask when deciding on something new! This way, you’ll have more knowledge about which features are most beneficial for your needs and how they compare against other official raspberry pi poe products on the market.

PoE Texas Raspberry Pi 3 B+ and 4 Pi Hat The POE-PiHat is ONLY for Passive 12-48 Volt PoE, Compatible with 15-56v Passive PoE (POE-PiHat)

 

  • PASSIVE PoE Solution – Ideal for integration with Solar and Battery systems. Works with a PASSIVE PoE switch or injector from 15 – 56 volts
  • Fits Raspberry Pi 3 B+ and Raspberry Pi 4 (Not Included)
  • Smaller, more space efficient than Official Pi-HAT – Fits inside Official Raspberry Pi Enclosure (Not included)
  • Provides a regulated 5 volts 2.4 amp with solder pads on top for a DC bus
  • For expert technical support from Austin, Texas please call 512 479 0317

waveshare PoE HAT for Raspberry Pi 4 B/3 B+,Power Over Ethernet HAT (D) with Fan,Support IEEE 802.3af Network,Compatible with Raspberry Pi Official 4B Case

 

  • The PoE HAT (D) Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
  • PoE (Power Over Ethernet) capability,IEEE 802.3af-compliant
  • Fully isolated switched-mode power supply (SMPS)
  • Onboard high speed active cooling fan, better heat dissipation

On the blog, customers rely on recommendations from our editorial team to shop.

And for good reason, their inventory is full of great official raspberry pi poe products, such as notebooks and books.

We’ve rounded up some of our favorite official raspberry pi poe products below that you can buy without leaving your home.

Take our word for it, and customers believe in our official raspberry pi poe products. We only sell the best quality.

 

Waveshare Power Over Ethernet HAT (Type B) for Raspberry Pi 3B+/4B 802.3af Power-Sourcing Equipment Required

 

  • Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant
  • Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HATs
  • Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable
  • 128 × 32 Pixels, I2C-Bus Controlled Monitoring Processor Temperature, IP Address, Fan Status In Real-Time
  • Allows Auto Running On Powerup OR Programmable Control, Configured By SwitchAutomatically Turn On/Off Depending On The Raspberry Pi Processor Temperature

This site will make you have a pleasant shopping experience. Our team compared hundreds of official raspberry pi poe products. We analyzed lots of official raspberry pi poe products, then picked the most popular official raspberry pi poe products to put into our selection. The official raspberry pi poe products in the post are of good quality and at a reasonable price.

Our team tested hundreds of official raspberry pi poe products and selected the best 10 official raspberry pi poe products from them. This blog lists the most popular official raspberry pi poe products this year. We read both good and bad customers’ reviews from the Internet to confirm what we choose is worthy to buy really at its price.

Picking official raspberry pi poe products from our blog can save you a lot of time. The official raspberry pi poe products we listed are very popular, and the official raspberry pi poe products come from reputable stores. We recommend the carefully selected official raspberry pi poe products in the post. 

All the official raspberry pi poe products are of high quality and at a reasonable price. You are not worried to buy official raspberry pi poe products from our selection in each post. You just need to check the following list and choose the official raspberry pi poe products that suit your need most.

All products in the blog are high quality